|
| 1. Added FTP port and password setting under Setup->Preferences |
|
| 2. Remove Surround Mode setting in Setup->Audio/Video page |
|
| 3. Set Dolby Digital audio to pass thru |
|
4. Ticker Tape support (Images in playlist have to be JPEG ONLY to enable this).
Note - Ticker Tape (OSD plane 1280x720) will degrade during 1080P video playback due to limitation of bandwidth. |
|
| 5. Disabled INFO key, so that infobar won't be called to interfere with tickertape. |
|
| 6. Include shortcut key to on-the-fly switch to VGA mode (1280x768x60Hz), which is key "4". |
|
| 7. Disable TV Mode + "1", "2", "3", "5" and "6" switching. |
|
| 8. Fixed intermittent flash setting corruption issue by disabling volume & color settings committing to flash on the fly. |
|
| 9. Support WN-100 USB WiFi Adapter. |
|
10. An improved internal and external USB identification mechanism according to their port topology.
Internal USB will be always identified as "USB_DRIVE_DSS" and displayed as "Digital Signage Flash Drive", while external USB will be assigned "USB_DRIVE_B-1".
Note: marker.dss no longer needed to identify internal USB drive
|
|
| 11. Support preview playback from external USB even when internal USB is not plugged in. |
|
| 12. Improved start up USB handling include: |
| - Allows preview playback from external USB, regardless whether the internal USB is in place. |
| - Allows external-to-internal USB copy with both drives being in place when booting up. |
| - Allows insert playback (external playlist "insert.dss" is appended to the internal playlist) with both drives plugged in during boot up. |
|
| 13. Suppressed all playback OSD (zoom, trickmodes, cannot play, etc), including music info stream. |
|
| 14. When "reboot.dss" is received through FTP, the player stops playback and rebbot itself. |
|
15. When "standby.dss" is received through FTP, player will stop the playback, turn off the display and generate a "standby-ok.dss".
When the "standby.dss" is removed through FTP, the player will turn on the display and start the playback.
|
|
| 16. Better Aspect Ratio detection for those WMV with wrong aspect ratio information in ASF file header. |
|
| 17. Multiple video interlacing modes supported which is on the fly configurable via /dss/config/interlace.dss from the internal USB drive: |
| - 0: Bob - no deinterlacing. |
| - 1: modulated Weave |
| - 2: motion adaptative |
| - 3: Weave |
| - Invalid value or unavailability of "interlace.dss" will assume "0" as the default setting. |
|
